Recently, I wanted to create a layering effect with underglaze, using masking tape. I was worried that the masking tape would pull off the unfired underglaze. And, I found myself wondering ‘can you bisque fire twice?’. So, I did a bit of research and this is what I found out. You can bisque fire twice…
Coil pottery is a great way to hand-build pots. You can make lovely, strong pots with character and individuality using simple coiling methods. This article is a step-by-step guide on how to make coil pots. I will look at 5 different coil pottery techniques so you can experiment and decide which one you enjoy most. …
There is lots of scope for things to go wrong when you apply glaze to pottery. You can mess up your glaze design, apply the glaze too thick, or even apply the wrong glaze. If your glazing has gone wrong, you’re probably wondering if you can wash glaze off bisque pottery and start again. Fortunately,…
This article is all about how to make slip for clay. There are different kinds of slip, used for different purposes. And there are some variations in how to make slip for clay depending on how you want to use it. I will cover these differences and outline a step-by-step guide for making different kinds…
Over time I have collected a wide range of underglaze colors and brands. Nevertheless, I still sometimes find that don’t have the exact color I want. And I found myself wondering about mixing underglazes. Questions came up for me like whether you can mix underglaze colors? What about mixing different brands of underglaze? And can…
I recently made my first pot with a lid on it. I was at pains to make sure the lid was a perfect fit. But I know that clay shrinks when it dries and can warp when it’s fired. And I didn’t want my perfect lidded pot to be ruined. So, before I let it…
If you are making pottery without a wheel, you may be wondering about the best clay for handbuilding. Pottery clay for handbuilding needs to have certain properties. In this article, I will look at what those properties are and which clay you will find them in. The best clay for handbuilding is stoneware or earthenware…
The first step in making coil pottery is learning how to roll a clay coil. This might sound simple, and of course, in some ways, it is. But, it is also a bit of a skill. When I started making coil pots, I was surprised by how tricky it can be to roll a clay…
Since I started using my DIY raku kiln, I have picked up some tips on the raku firing process. It took me a few tries at firing a raku kiln to use it successfully. And I imagine that the same is true for other people starting out. So, I thought I’d write an article and…